Norsonic has developed a range of windscreens in different sizes and shapes dependent on the application they are intended for. All windscreens are made from open cell polyurethane foam.


The purpose of a windscreen is to reduce the noise created by the turbulence around the microphone in a wind field. A secondary effect of the windscreen is that it protects the microphone and preamplifier from dust, bumps and shocks. A windscreen will inevitably change the frequency response of the microphone slightly at higher frequencies. This change in frequency response is normally negligible, but it should be considered for meents requiring a high degree of accuracy.

As can be seen from these graphs, the effect of a windscreen as such on the microphone frequency response will, for most practical cases be negligible magnitude

Norsonic outdoor and environmental microphones Nor1210A&C are compensated for the effect of the windscreen and should therefore always be used with the windscreen mounted.


Nor1434 Windscreen, 90mm

Wind Shield for 1/2″ microphones/preamplifiers. Diameter 90mm.

Nor1434 windscreen, 90mm

Nor1451 Windscreen, 60mm

Wind Shield for 1/2″ microphones/preamplifiers. Diameter 60mm.

Nor1451 windscreen, 60mm

Nor1469 Windscreen, 60mm

Windscreen for 1/4″ microphones/preamplifiers. Diameter 60mm.

Nor1469 windscreen, 60mm

Nor1471 Windscreen, with birdspikes

Windscreen Nor1471 with birdspikes. It fits the Nor1210 and Nor1211 range of outdoor microphones.

Nor1471 windscreen w/birdspikes

Nor1472 Windscreen

Extra windscreen for Nor1210 and Nor1211.

Nor1472 windscreen

Nor4520A Windscreen

Windscreen for outdoor microphone protection kit Nor1212.

Nor4520A windscreen