For making footfall noise transmission measurements in buildings as set out in International and National Standards.

Self calibrating test !

Overview

Applications

  • Nor277 is a tapping machine for impact noise measurements designed to meet the requirements given in ISO 10140-5. ISO 16283-2 and the old ISO 140-6, -7,-8 as well as ASTM E492 and ASTM E1007.

Features

  • Impact sound transmission testing according to ISO 10140-5. ISO 16283-2 and the old ISO 140-6, -7,-8 as well as ASTM E492 and ASTM E1007
  • Determination of single number quantity index Ln,w, in accordance with ISO 717-2 and ASTM E-989
  • Remote operation from hand switch or PC
  • Mains or battery operation
  • Powered from 85-264 volt AC main supply. Built in Lithium Ion rechargeable batteries.
  • Battery capacity: Typical 1 hour with intermittent use and 45 minutes of continues operation.
  • Battery de-rating: <5% loss in capacity per 100 discharge/charge cycles.
  • Charging time: 2 hours
  • Compact
  • Low weight 10 kg (22 lb) incl. battery and wireless remote option
  • Rugged construction
  • Five hammers each having a mass of 500 g falling from a height of 40 mm (adjustable)
  • Tapping sequence of 10 impacts per second, rpm controlled via servo feedback loop
  • Built in self check of hammer fall speed, and tapping sequence.
  • Retractable feet
  • Dimensions feet retracted: 165 x 230 x 495 mm (6,5 x 9,1 x 19,5″)
  • Dimensions feet extended: 265 x 230 x 495 mm (10,4 x 9,1 x 19,5″)

Specifications

Hammers: 5 hammers @ 500 g. Effective falling height 40 mm (adjustable)
Tapping sequence: 10 impacts per second, rpm controlled via servo feedback loop.
Power: 84 – 264 V, 47 – 63 Hz
Battery operation: Optional built-in Li-Ion rechargeable battery.
Battery capacity: Typical 1 hour with intermittent use and 45 minutes of continues operation.
Battery de-rating: <5% loss in capacity per 100 discharge/charge cycles.
Battery charging time: 2 hours
Power consumption: Less than 30 W
Dimensions: H x L x W: 230 x 495 x 165 (265 feet extended) mm. Add 50 mm to the height for handle.
Weight: 10 kg (22 lb) including battery and wireless remote option

Accessories

Acc. incl.: Instruction manual, mains cable, small rod used for the verification of the fall height.
Optional acc.: Carrying case/Shipping case Nor1336

Ordering info

Option 1: Battery operation, must be specified when ordering
Option 2: Wireless remote control, must be specified when ordering

CE conformity

EMC compliance according to EN 50081-1 and EN 50082-1, Safety according to EN 61010-1-1993 and Machine directive 89/392

Downloads

  • Product Data: Nor277 Tapping machine

PD-277-Ed1Rev5-Eng-0518

  • Product Data: Noise excitation for Building Acoustics

PD-NoiseExcit-Ed6Rev1-Eng-1114